Filter
Top Products
278
Understanding the printer messages
58 Too Many
Bins Attached
Too many optional output bins are
installed on the printer.
Turn off and unplug the printer.
Remove the additional output bins.
Plug in the printer and turn it on.
See also: Setup Guide
58 Too Many
Disks Installed
Too many hard disks are installed on
the printer. The printer only supports
one hard disk at a time.
Turn off and unplug the printer.
Remove the excess hard disks from
the printer. Plug in the printer and
turn it on.
See also: Removing optional
printer memory and other option
cards; Removing an optional
flash memory card or optional
firmware card
58 Too Many
Flash Options
Too many flash memory options are
installed on the printer.
Turn off and unplug the printer.
Remove the excess flash memory.
Plug in the printer and turn it on.
See also: Removing an optional
flash memory card or optional
firmware card
58 Too Many
Trays Attached
Too many drawers with matching trays
are installed on the printer.
Turn off and unplug the printer.
Remove the additional drawers.
Plug in the printer and turn it on.
See also: Setup Guide
59 Incompatible <device> You have installed an incompatible
device.
<device>
is one of the following:
• Output Bin x
• Env Feeder
• Tray x
• Duplex
Remove the device and press Go to
clear the message.
61 Defective Disk The printer detects a defective hard
disk.
• Press Go to clear the message
and continue printing.
• Install a different hard disk before
you perform any operations that
require one.
See also: Setup Guide
62 Disk Full There is not enough memory on the
hard disk to store the data sent to the
printer.
• Press Go to clear the message
and continue processing. Any
information not previously stored
on the hard disk is deleted.
• Delete fonts, macros, and other
data stored on the hard disk.
Message What this message means What you can do