Filter
Top Products
277
Understanding the printer messages
54 Serial Option <x> Error The printer has detected a serial
interface error on a serial port.
• Make sure the serial link is set up
correctly and you are using the
appropriate cable.
• Press Go to clear the message
and continue printing. The job
may not print correctly.
• Press Menu to open the Job
Menu and reset the printer.
54 Network <x> Software
Error
The printer cannot establish
communications with an installed
network port.
• Press Go to clear the message
and continue printing. The job
may not print correctly.
• Program new firmware for the
network interface by way of the
parallel port.
• Press Menu to open the Job
Menu and reset the printer.
54 Std Network Software
Error
55 Unsupported Flash
in Slot X
The printer detects an unsupported
flash memory card in one of the
connectors.
Turn the printer off. Remove the
unsupported option card.
55 Unsupported
Option in Slot X
The printer detects an unsupported
option card in one of the connectors.
Turn the printer off. Remove the
unsupported option card.
56 Serial Port <x> Disabled Data has been sent to the printer
through a serial port, but the serial
port is disabled.
• Press Go to clear the message.
The printer discards any data
received through the serial port.
• Make sure the Serial Buffer menu
item in the Serial Menu is not set
to Disabled.
See also: Serial Buffer
56 Parallel Port <x>
Disabled
Data has been sent to the printer
through a parallel port, but the parallel
port is disabled.
• Press Go to clear the message.
The printer discards any data
received through the parallel
port.
• Make sure the Parallel Buffer
menu item in the Parallel Menu is
not set to Disabled.
See also: Parallel Buffer
56 Std Parallel Port
Disabled
56 USB Port <x> Disabled Data has been sent to the printer
through a USB port, but the USB port
is disabled.
• Press Go to clear the message.
The printer discards any data
received through the USB port.
• Make sure the USB Buffer menu
item in the USB Menu is not set
to Disabled.
See also: USB Buffer
56 Standard USB Port
Disabled
57 Configuration
Change
The printer could not restore jobs from
the disk because the configuration of
the printer changed.
Press Go to clear the message.
Message What this message means What you can do