Filter
Top Products
55
Using and loading the multipurpose feeder
Using and loading the multipurpose feeder
The multipurpose feeder can hold several sizes and types of print media, such as transparencies,
postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored
paper.
Keep in mind the following capacities, dimensions, and operating tips when loading the multipurpose
feeder.
Capacity
The maximum stack height is 10 mm (0.4 in.). The multipurpose feeder can hold approximately:
• 100 sheets of 75 g/m
2
(20 lb) paper
• 10 envelopes
• 75 transparencies
Print media dimensions
The multipurpose feeder accepts print media within the following dimensions:
• Width—69.85 mm (2.75 in.) to 229 mm (9.01 in.)
• Length—127 mm (5 in.) to 355.6 mm (14 in.)
Trouble-free printing
• Load only one size and type of print media at a time in the multipurpose feeder.
• To achieve the best possible print quality, use only high-quality print media that is designed
for use in laser printers. For more guidelines on print media, see Print media guidelines.
• To prevent jams, do not add or remove print media when there is still print media in the
multipurpose feeder or when the printer is printing from the multipurpose feeder.
• Print media should be loaded with the recommended print side up and the top of the print
media going into the multipurpose feeder first.
• Do not place objects on the multipurpose feeder. Also, avoid pressing down or applying
excessive force on it.
• Do not remove any tray while a job is printing from the multipurpose feeder or Busy is
displayed on the operator panel. Doing so may cause a jam.
Note: The multipurpose feeder may be used with the optional envelope feeder installed.