Lexmark T632 Printer User Manual


 
33
Print media guidelines
Printing on letterhead
Check with the manufacturer or vendor to determine whether the preprinted letterhead you have
chosen is acceptable for laser printers.
Page orientation is important when printing on letterhead. Use the following table for help when
loading letterhead in the print media sources.
Selecting prepunched paper
Prepunched paper brands can differ in the number and placement of holes and in manufacturing
techniques.
Use the following guidelines to select and use prepunched paper:
Test paper from several manufacturers before ordering and using large quantities of pre-
punched paper.
Paper should be punched at the paper manufacturer and not drilled into paper already
packaged in a ream. Drilled paper can cause jams when multiple sheets feed through the
printer.
Prepunched paper can include more paper dust than standard paper. Your printer may
require more frequent cleaning and feed reliability may not be as good as that of standard
paper.
Weight guidelines for prepunched paper are the same as for nonpunched paper.
Print media source or
process
Top of page
Print side Portrait Landscape
Tray 1
(standard tray)
Tray 2
(optional 250-sheet or
500-sheet drawer)
Face down Front of tray Left side of tray
Optional 2000-sheet
drawer
Face down Front of the drawer Not applicable
Duplex printing using
tray 1 or tray 2
Face up Logo faces rear of tray Not applicable
Multipurpose feeder
(including feeding
individual sheets)
Face up Logo enters the printer first Left side of tray
Duplex printing using
the multipurpose
feeder
Face down Logo enters the printer last Not applicable