Filter
Top Products
269
Understanding the printer messages
Menus Disabled The printer menus are disabled. You
cannot change the printer settings
from the operator panel.
You can still open the Job Menu to
cancel a job that is printing or to
select a confidential job or a held
job that you want to print. If you
need access to the printer menus,
contact your network administrator.
See also: Disabling operator
panel menus
Network Card Busy An internal print server (also called an
internal network adapter or INA) is
being reset.
Wait for the message to clear.
Network <x> A network interface is the active
communication link.
Network <x>, <y> A network interface is the active
communication link, where <x>
represents the active communication
link and <y> represents the channel.
No Jobs Found.
Retry?
The four-digit personal identification
number (PIN) you entered is not
associated with any confidential print
job.
• Press Go to enter another PIN.
• Press Stop to clear the PIN entry
prompt.
See also: Printing a confidential
job
Not Ready The printer is not ready to receive or
process data. Someone pressed Stop
to take the printer offline.
Press Go to make the printer ready
to receive jobs.
Ovrflow Bin Full The mailbox’s designated overflow bin
is full.
Remove the stack of paper from the
bin to clear the message.
Parallel <x> A parallel interface is the active
communication link.
Performing Self Test The printer is running the series of
start-up tests it performs after it is
turned on.
Wait for the message to clear.
Power Saver The printer is ready to receive and
process data. It is reducing its
electricity consumption while idle. If
the printer remains inactive for the
period of time specified in the Power
Saver menu item (20 minutes is the
factory default), the Power Saver
message replaces the Ready
message on the display.
• Send a job to print.
• Press Go to quickly warm the
printer to normal operating
temperature and display the
Ready message.
Message What this message means What you can do