Filter
Top Products
12
Safety information
Safety information
• If your product is NOT marked with this symbol , it MUST be connected to an electrical
outlet that is properly grounded.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as
the power cord or telephone, during a lightning storm.
• The power cord must be connected to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the operating instructions, to a
professional service person.
• This product is designed, tested, and approved to meet strict global safety standards with the
use of specific Lexmark components. The safety features of some parts may not always be
obvious. Lexmark is not responsible for the use of other replacement parts.
• Your product uses a laser.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• Your product uses a printing process that heats the print media, and the heat may cause the
media to release emissions. You must understand the section in your operating instructions
that discusses the guidelines for selecting print media to avoid the possibility of harmful
emissions.
Cautions, warnings, and attentions
CAUTION: A caution identifies something that could cause you harm.
Warning: A warning identifies something that could damage your product hardware or
software.
Attention!
This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols
without first touching the metal frame of the printer.
Electronic emission notices
Without a network card installed
Federal Communications Commission (FCC) compliance information
statement
The Lexmark T family base printers, Types 4060-000 and 4060-200, and network printers, Types
4060-010 and 4060-210, have been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)