Filter
Top Products
Menu item Description
Allow Background Removal
On
Off
Specifies whether image background removal is allowed
during copy, fax, e-mail, FTP, or scan to USB
Note: On is the factory default setting. The background of the
image will be removed.
Allow Custom Job Scans
On
Off
Lets you scan multiple jobs to one file
Note: On is the factory default setting. If On is selected, the
Allow Custom Job Scans setting can be enabled for specific
jobs.
Scanner Jam Recovery
Job level
Page level
Specifies how a scanned job should be reloaded if a paper jam
occurs in the ADF
Notes:
• If Job level is selected, the entire job must be rescanned
if any pages jam.
• If Page level is selected, rescan from the jammed page
forward.
Web Page Refresh Rate
30–300
Specifies the number of seconds between embedded Web
page refreshes
Note: 120 seconds is the factory default setting.
Contact Name
<none>
Specifies a contact name for the printer
Note: The contact name will be stored on the embedded Web
page.
Location
<none>
Specifies the location of the printer
Note: The contact name will be stored on the embedded Web
page.
Alarms
Alarm Control
Toner Alarm
Staple Alarm
Hole Punch Alarm
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
Off
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control.
Single sounds three quick beeps.
• Off is the factory default setting for Toner Alarm, Staple
Alarm, and Hole Punch Alarm. Off means no alarm will
sound.
• Continuous repeats three beeps every 10 seconds.
• Stapler Alarm and Hole Punch Alarm are available only
when the finisher is installed.
138