Filter
Top Products
63Printing ideas
Printer overview
Basic printing
Printing ideas
Maintenance
Troubleshooting
Notices
Index
Lexmark Z45
Using this
Guide...
www.lexmark.com
Printing a banner
Note: Some software applications and some operating systems do not support
banner printing.
Step 1: Load the banner paper
Make sure your banner paper is not used or damaged.
1 Remove any paper from the paper support.
2 Tear off enough pages for the banner
including one extra sheet, and then place
them behind the printer.
3 Load the unattached leading edge of the first
page into the printer, with the right side
against the paper support.
Note: Forcing the paper too far into the
printer may cause a paper jam.
For help, see Clearing paper
misfeeds or jams.