Filter
Top Products
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Connecting the Speakers
- Only on some models.
1
Connect an input signal cable to use before
installing the speakers.
3
After installing your speakers, use holders and
cable ties to organize the speaker cables.
2
Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
Using the Mounting Cable
Tie
- Applicable only to 42WS10 and 47WS10 models.
First, connect the input signal cable to be used.
Insert the cable tie into the bottom hole on the
back as shown in the figure to organize cables.
y
The Mounting cable tie is provided for
42WS10 and 47WS10 models only.
NOTE