LG Electronics 44VR MU-42PZ44S Computer Monitor User Manual


 
Owners Manual 11
Installation
External Equipment Connections
External Equipment Connections
NOTE: All cables shown are not included with the plasma display.
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor
- Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
picture from a VCR. If the 4:3 picture format is used; the fixed image may remain visible on the screen.
How to connect
1. Connect the provided BNC-RCA adapter to the monitors
VIDEO INPUT.
2. Connect the audio and video cables from the VCR's output
jacks to the monitor input jacks, as shown in the figure. When
connecting the monitor to a VCR, match the jack colors: (Video
= yellow, Audio Left = white, and Audio Right = red).
VCR: Connect the video output cable from the VCR to the
VIDEO input on the monitor.
S-VIDEO VCR: Connect the S-Video output cable from the
VCR to the S-VIDEO input. (Note that S-Video yields higher
quality video).
How to use
1. Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.)
2. Use the INPUT SELECT button on the remote control to select
Video.
(If connected to S-VIDEO, select the S-Video external input
source.)
VCR Setup
VCR Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
How to connect
1. Connect the provided BNC-RCA adapter to the monitors
VIDEO INPUT.
2. Connect the audio and video cables from the cable box's out-
put jacks to the monitor input jacks, as shown in the figure.
When connecting the monitor to a cable TV, match the jack
colors (Video = yellow, Audio Left = white, and Audio Right =
red).
How to use
1. Use the INPUT SELECT button on the remote control to
select Video.
2. Select your desired channel with the cable box remote control.
Cable
Cable
TV Setup
TV Setup
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
VIDEO
INPUT
YPB PR
(MONO)
R
AUDIO
L
R
AUDIO
L
S-VIDEO AUDIO INPUT
AUDIO INPUT
REMOTE
CONTROL
COMPONENT INPUT
VCR
TV
VCR
RF Cable
(R) AUDIO (L) VIDEO
VIDEO
INPUT
YPB PR
(MONO)
R
AUDIO
L
R
AUDIO
L
S-VIDEO AUDIO INPUT
AUDIO INPUT
REMOTE
CONTROL
COMPONENT INPUT
Cable Box