Filter
Top Products
Information
34
Regarding the projector lamp control
● Don’t turn off the projector at least in 5 minutes after activating it.
- The frequent On/Off changes may cause the lamp to deteriorate.
● Don’t pull out the power cord while the projector or the cooling fan are running.
- It may shorten the life of the lamp.
● The life-span of depends on the environment its used in and how well its treated.
● The projector uses a high pressure mercury lamp. Shock or abuse to the projector can cause the lamp to burst.
● Continuing to use a lamp the projector has indicated needs replacement may burst.
● If the lamp burst, perform the following:
- Remove the power cord immediately.
- Let some fresh air in immediately (Ventilation).
- Have a service center check the projector's condition and replace the lamp.
- Do not disassemble the projector.
WARNING