Filter
Top Products
14
Adjust the audio settings
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
HD AV Sync - Sometimes Digital TV encounters a delay between picture and
sound. If this happens you can compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV
to scroll up and down through the delay amount, which you can set at anything
between 0 and 300m sec.
The delay will vary depending on which digital TV channel you are on. If you
change the channel you may need to readjust the HD AV Sync.
Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering the number, press
CLEAR to delete numbers.
If you forget your password you can reset it. Press SETUP to display the Setup
menu. Input ‘210499’ and press ENTER. The password has now been cleared.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digit password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 21.
Adjust the others settings
PBC (Playback Control) – Playback control provides special navigation fea-
tures that are available on some Video CDs. Select [On] to use this feature.
DivX(R) Registration – We provide you with the DivX® VOD (Video On
Demand) registration code that allows you to rent and purchase videos using
the DivX® VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the registra-
tion code of the unit.
Setting the sound mode
Switch on XTS/XTS Pro Sound
XTS allows you to get the best sound quality for whatever you are watching. Press
the XTS Pro button repeatedly to cycle through the three options:XTS On, XTS Pro
On, Normal.
XTS - Use XTS when the bass of an original soundtrack is weak by
enhancing the subwoofer. It also splits the sound evenly
between the front and rear speakers.
XTS-P - This optimizes the audio signal in balanced frequency response and
enhances the speakers’ performance. XTS Pro also recognizes Dolby
Digital, Pro Logic II, and DTS surround-sound processing modes.
Set a pre-programmed sound field
This system has a number of pre-set surround sound fields. Select the one
which best suits the program you are watching by pressing SOUND repeatedly
to cycle through the options: Bypass, On Stage, Studio, Club, Hall, Theatre,
Church, Movie, Music, Matrix.
VSM (VIRTUAL SOUND MATRIX)
You can select the Virtual sound. Press VSM to set the virtual sound.
2Ch source
[ON STAGE] mode: Simulates a large Concert hall
[VIRTUAL] mode:
Realtime 3D positioned sound rendering technology
with stereo sources, optimized for stereo speakers. Listeners may expe-
rience amazing virtual surround effects with their own multimedia play-
ers.
5.1Ch source
[VIRTUAL] mode:
The Multichannel sound changes the sound in 5.1 ch
into a virtual one in the 10.1 ch so that it provides such a feeling that
you listen to the sound simultaneously from the right and left speakers
and center speaker.
HT762TZW-A0_DCANLLK_canENG 2/21/08 8:51 PM Page 14