Filter
Top Products
A20
Controlling the Multiple Monitors
Connecting the cable
Connect the RS-232C cable
as shown in the picture.
* The RS-232C protocol is used for communication between the PC and monitor.
You can turn the monitor on/off, select an input source or adjust the OSD menu
from your PC.
Baud Rate : 9600bps
Data Length : 8bits
Parity Bit : NONE
Stop Bit : 1bit
Flow Control : NONE
Use this method to connect several monitors to a single PC.
You can control several monitors at a time by connecting them to a single PC.
Communication Parameter
PC
0utput
0utput
0utput
0utput
< RS-232C Distributor- (Not included) >
Input