Filter
Top Products
- 5 -
1. MENU Button
Use this button to enter or exit the on screen display.
2.
Use these buttons to choose or adjust items in the on
screen display
3.
AUTO Button
Use this button to enter a selection in the on screen
display.
4.
OPERATING INSTRUCTIONS
Front Control Panel
FRONT VIEW REAR VIEW
D
AUDIO
DC OUT
D-Sub Signal Port
Power Connector
AUDIO DC OUT
Power (DPMS) Indicator
Power ON/OFF Button
Button
AUTO Button
Power Button
MENU Button
Power Indicator
SET Button
Button
<Shortcut Keys>
• Brightness and Contrast can be
adjusted directly without entering the
On Screen Display (OSD) system.
Touch the buttons to adjust
the settings and then the OSD button
to save all changes. The Brightness
and Contrast functions are also
available in the On Screen Display
(OSD) menu.
100
100
* AUTO adjustment function
TO the AUTO button before
using OSD menu. This button is
for the automatic adjustment of the screen position, clock
and phase.
Note: Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitor’s Position, Clock and Phase manually.
PROCESSING
AUTO CONFIGURATION
MENU, Button
CONTROLS LOCKED
CONTROLS UNLOCKED
Press the hold the MENU button and
button for 3 seconds: the message
“CONTROLS LOCKED” appears.
You can unlock the OSD controls
at any time by pushing the MENU,
button for 3 seconds:
the message “CONTROLS UNLOCKED” will appear.