Filter
Top Products
88
Connecting to the Computer
2. Press button on the front switch panel to turn the
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically
on D-SUB input.
Connecting the Display
Wall-outlet type
signal input cables
A
B
Connect D-SUB(RGB Analog) Cable (PC)
Connect D-SUB(RGB Analog) Cable (Mac)
Mac adapter
(This item must be purchased separately.)
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-SUB
VGA connector on the supplied cable to a 15 pin 2 row
connector.
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings. When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for D-SUB
input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or
tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to
improve resolution.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
When connecting the D-SUB cable with the LAN cable, connect the D-SUB cable first. Then, connect the LAN cable
and other signal input cables.
1. Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Connect the signal
input cable and tighten
it up by turning in the
direction of the arrow
as shown in the figure.