Filter
Top Products
99
Wall-outlet type
signal input
cables
Connecting to the Computer Using LAN
1. Make sure to turn off the computer and product. Connect the cable as below sketch map
form to .
1
2
Connect peripheral devices
Connect LAN Cable
Connecting the Display
Keyboard/Mouse Input
LAN cable should be
connected before boo-
ting PC.(This item must
be purchased separately.)
Headphone/Earphone Input
Automatically mutes the
speaker volume when the
headphones are plugged in.
When you use the monitor speaker via the LAN, turn the PC volume up to the highest
level and adjust the monitor volume.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or titled
screen while using the device or after changing screen resolution, press the AUTO/SET function
button to improve resolution.
2. Press button on the front switch panel to turn the power on.
USB 1.1 port
(Only for keyboard
and mouse)
USB 2.0 port
(Only for USB
memory stick)
Host
ISP
(Internet Service Provider)
switch hub
Network Monitor
For an angle plug earphone/microphone, it is difficult connect it with a peripheral device, so
use a straight type.
Connect the USB extension cable to the USB 2.0 port for more convenient use.
When connecting the D-SUB cable with the LAN cable, connect the D-SUB cable first. Then, connect the LAN
cable and other signal input cables.
Angle type
Straight type
LAN Cable Type
- Standard : IEEE 802.3 ETHERNET
A
B