Filter
Top Products
Specifications 19
3.5 Terminating Assemblies (Optional)
The optional terminating assembly allows top access connections for up to six loads. Refer to
Figure 18.
Each load position is rated at 600 A and can accept up to three lugs having 1” or 1-3/4”
c-c hole spacing, for cables up to 777 kcmil.
The terminating assembly is bolted to the top of the main or auxiliary distribution cabinets and,
therefore, increase the cabinet height by 12 inches. The weight of the terminating assembly is
12.5 kg (27.6 lb).
An optional Lexan
™
protective cover is available to protect the connections of the load cables.
Figure 18 Perspective view of the a terminating assemblies
Glastic
insulating
material
NT6C2625
(for main distribution cabinet)
NT6C2624
(for auxiliary distribution cabinet)
Optional
protective
cover