Filter
Top Products
Equipment Inspection, Handling And Storage
9
4.0 EQUIPMENT INSPECTION, HANDLING AND STORAGE
Upon arrival of the unit, and before unpacking, verify that the labeled equipment matches the bill of
lading. Inspect all items for damage, either visible or concealed. Damage should be immediately
reported to the carrier and a damage claim filed with a copy sent to your local sales representative.
4.1 Packaging Material
All material used to package this unit is recyclable. Please save for future use or
dispose of the material appropriately.
SAFETY INFORMATION
4.2 Handling
When possible, transport the unit using a forklift or pallet jack. Otherwise use a crane with belts or
cables.
• When using a forklift or pallet jack, make sure the forks (if adjustable) are spread to the widest
allowable distance that will fit under the skid.
• Ensure that the fork length is suitable for the unit length.
• When using a forklift while moving the packaged XDK, do not lift it higher than 6" (152mm).
• If circumstances require the XDK to be lifted higher than 6" (152mm), great care must be exer-
cised. Personnel not involved in moving the unit must be at least 20' (5m) from the lift point of the
unit.
• Belts or cables must be used when the XDK is moved with a crane.
• The XDK’s net weight is 749 lb. (340 kg).
• Avoid twisting the housing or other damage during handling.
• Ensure that the XDK’s doors are closed prior to lifting.
• Do not stand under an XDK while it is suspended.
• Hooks used to attach to the unit must be of appropriate tensile strength.
• The XDK must not be lifted at an angle.
!
WARNING
Risk of top-heavy unit falling over. Improper handling can cause equipment damage, injury or
death! Read all of the following instructions before attempting to move, lift, remove packaging
from or preparing unit for installation.
!
WARNING
Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury.
Only properly trained personnel wearing appropriate safety headgear, gloves, shoes and
glasses should attempt to move, lift, remove packaging from or prepare unit for installation.
!
CAUTION
Risk of overhead interference. Can cause unit and/or structure damage.
Refer to the installation plans prior to moving the unit to verify clearances.
!
CAUTION
Risk of damage from fork lift! Improper handling with the forklift can cause exterior and/or
underside damage! Keep tines of the fork lift level and at a height suitable to fit below the
skid.
R