Filter
Top Products
20
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
ADJ X
ADJ
ADJ
SEC
With the Truss Assembly on its side, slide a 1/4” Threaded Rod (ADH) through the Roof Truss Brace and Truss
Connector as shown. Secure the top and bottom of the 1/4” Threaded Rod with a 1/4” Cap Nut (ADJ). Tighten all
hardware. The 1/4” Threaded Rod will still spin freely. Set aside.
ADH (x1) (Not to scale)
12 11/16”
7/16”X
ADH
WARNING
Do not overtighten the Cap Nut.
S
3.5
3