Lindy 32590 Switch User Manual


 
Installation Manual
English
- 6 -
Troubleshooting
The DVI Switch Remote does not respond to any commands from the remote control.
If present, remove the plastic tab labelled ‘Remove this tab’ that ships with the remote
control.
Make sure you are in line of sight of the DVI Switch Remote. Make sure that there are no
obstructions which may be blocking the infra-red signal from the remote control.
Try switching channels using the push button on the switch. If this does not work, unplug
and plug all the connections as described in the Installation section earlier in this manual.
Press and hold one of the IR code buttons until the code is displayed on the switch’s front
panel LED.
Try unplugging and plugging all connections as described in the Installation section of this
manual.
Ensure the battery is correctly installed in the remote control. Try a new battery (Type
CR2025)
There is no picture on the display.
Check all connected devices are correctly switched on.
Make sure all cables and connectors are correctly installed.
If a computer is connected, hit a key or move the mouse to wake it from power saving mode.
If connecting mixed DVI/HDMI and VGA devices and your display does not support auto-
switching between analogue and digital inputs, you may have to manually select the correct
line-in input on your display.
A connected DVD Player is set to Pause but restarts playback when the DVI Switch
Remote port is switched
This problem is caused by an incompatibility between the firmware of certain DVD Players
and DVI switch chipsets. Try installing the latest firmware update for your DVD player.
Benutzerhandbuch Deutsch
- 7 -
EINFÜHRUNG
Wir gratulieren Ihnen zum Kauf des LINDY DVI Switch Remote. Wir sind sicher, dass Sie eine
gute Wahl getroffen haben. Sie können diesen Switch an einen Fernseher, Plasma-TV,
Projektor oder Monitor anschließen und zwischen mehreren Signalquellen (DVI/HDMI/VGA
Geräten) hin und her schalten.
Der DVI Switch Remote wurde für den Home Theater- sowie für den Computerbereich
entwickelt. Er unterstützt digitale HDTV Signale einschließlich der HDCP Verschlüsselung bis
zu den aktuell höchsten Auflösungen von 1080p sowie Computer-DVI-Signale bis 1920x1200
bis 60Hz. Analoge VGA Signale werden ebenfalls unterstützt und umgeschaltet, es findet
jedoch keine Signalwandlung analog (VGA) nach digital DVI (DVI-D) statt! Wenn Sie gemischt
analog und digitale Signalquellen verwenden muss Ihr Monitor die Darstellung beider
Signalarten beherrschen!
Das Umschalten erfolgt entweder über die mitgelieferte Fernbedienung oder über die Tasten an
der Front des Switches.
Typischer Anwendungsfall
Lieferumfang
LINDY 2 oder 4 Port DVI Switch Remote
Infrarot Fernbedienung mit Batterie (CR2025)
Netzteil 9V DC, 500mA
Dies Handbuch
Eigenschaften
Eingänge: 2 bzw. 4x DVI-I Buchse
Ausgang: 1x DVI-I Buchse
Kanalumschaltung: Fronttaste oder Fernbedienung
4 umschaltbare IR Codes zur Verhinderung von Konflikten mit anderen Fernbedienungen
LED Kanalanzeige zeigt den gewählten Kanal sowie den Code der Fernbedienung
HDCP Unterstützung
Unterstützt HDTV Auflösungen bis 1080p (1920 x 1080 progressiv)
Unterstützt im Computerbetrieb DVI-D Single Link Auflösungen bis 1920 x 1200 @60Hz
(TFT) und VGA Auflösungen bis 2048 x 1536
Display
D
VD Player
PC
Set Top Box