Lindy LF1TBELRG Switch User Manual


 
LINDY CPU Switch Smart Installation and Use Page 32
The LINDY CPU Switch Smart supports Internet Mice that are compatible with the
Microsoft IntelliMouse. These are fitted with a wheel or other scroll control and
sometimes have additional buttons.
Examples are:
Microsoft IntelliMouse
Logitech Pilot Mouse +
Logitech MouseMan+
Genius NetMouse
Genius NetMouse Pro
Standard PS/2 and IntelliMouse compatible mice can be connected to the control
port. You may configure your CPUs using Microsoft PS/2 or IntelliMouse drivers in
any combination as required. The IntelliMouse features are supported on both PS/2
and RS232 CPU connections. When using PS/2 CPU connections, the LINDY CPU
Switch Smart will automatically configure itself to the type of mouse requested by
the driver. If you are using RS232 CPU connections then you will need to select
mouse options U4 or U5 to enable the IntelliMouse features.
U1 - LINDY CPU Switch Smart channels are switchable using a 3 button mouse
or IntelliMouse (default)
(LINDY CPU Switch Smart reports 2 button mouse mode to PCs)
U2 - LINDY CPU Switch Smart channels are not switchable using 3 button mouse
or IntelliMouse
(LINDY CPU Switch Smart reports 2 button mouse mode to PCs)
U3 - LINDY CPU Switch Smart channels are not switchable using 3 button mouse
or IntelliMouse
(LINDY CPU Switch Smart reports 3 button mouse mode to PCs)
U4 - LINDY CPU Switch Smart channels are switchable using 3 button mouse
or IntelliMouse
(LINDY CPU Switch Smart reports IntelliMouse mode to PCs)
U5 - LINDY CPU Switch Smart channels are not switchable using 3 button mouse
or IntelliMouse
(LINDY CPU Switch Smart reports IntelliMouse mode to PCs)
4.4 Keyboard hotkey combination
The keyboard hotkey combination is used to change a channel, set autoscan mode
or secure the product (so that the password needs to be typed before it can be used