Filter
Top Products
- 9 -
standard PCI-to-PCI bridge', click 'Next'. Select 'Search for the best driver for your
device [Recommended]' and click 'Next'.
3. Select 'Floppy disk drives' and click 'Next'.
4. When the wizard indicates that it found a driver for the device click 'Next'. Then click
'Finish' to exit the wizard.
5. The Hardware wizard will display that it found 'NEC USB Open Host Controller',
click 'Next'.
6. Select 'Search for the best driver for your device (Recommended)' and click 'Next'.
7. Select 'Floppy disk drives'. And insert diskette driver into Floppy drive, and click 'Next'.
8. Select 'The Updated driver (Recommended)'. NEC USB Open Host Controller, and click
'Next'. Then click 'Next' to continue.
9. If display 'Insert Disk' (please insert the disk labeled windows 98 second Edition
CD-ROM) and click OK, Then click 'Finish' to exit the wizard.
10. The Hardware wizard will display that it found 'NEC USB Open Host Controller',
and click 'Next'.
11. Select 'Search for the best driver for your device (Recommended)'.
Click 'Next'.
12. Select 'Floppy disk drives' click 'Next', select 'The Updated driver
(Recommended)' NEC USB Open Host Controller, and click 'Next'. Then click 'Next'
to continue.
13. If display 'Insert Disk' (please insert the disk labeled windows 98 second Edition
CD-ROM) and click OK, then click 'Finish' to exit the wizard.
14. The Hardware wizard will display that it found 'PCI Universal serial Bus', and click
'Next'.
15. Select 'Search for the best driver for your device (Recommended)'. Click 'Next',
16. Select 'Floppy disk drives' and click 'Next', select 'The Updated driver
(Recommended)' NEC PCI To USB Enhanced Host Controller, and click 'Next'.
17. When the wizard indicates that it found a driver for the device, click 'Next'. Then click
'Finish' to exit the wizard.
18. The Hardware Wizard will display that it found a 'PCI Raid Controller', click
'Next'.
19. Select 'Search for the best driver for your device [Recommended]' and click
'Next'.
20. Make sure the 'Floppy disk drives' checkbox is checked and click 'Next'. Then click
'Next' to continue.
21. System will go through the enumeration process and install the driver.
At the end of the process, click ' Finish' to complete the installation.
Reboot the system if your Windows 98SE drive is connected on the