Filter
Top Products
- 6 -
This section provides the information on how to install the drivers of RAID Native
SATA-150 4Ports PCI Host Adapter for the operating systems:
New & Existing Windows 98/98 SE
New & Existing Windows ME
New & Existing Windows NT 4.0
New & Existing Windows 2000
New & Existing Windows XP
4.1. Windows 98/98SE Driver Installation
For New Windows 98/98 SE Systems (Fresh Installation)
1. After the SATA RAID PCI Host Adapter and attached drives are configured,
follow Microsoft procedures to install Windows accordingly.
2. Once Windows has been installed, double click My Computer/Control
Panel/System, then click Device Manager.
3. Double click Other Devices then PCI RAID Controller.
4. Click Driver tab, then Update Driver.
5. Insert the Driver CD and click Next.
6. Select Search for a better driver than the one ...option and click Next.
7. Check Specify a location, uncheck the other boxes, type in E:\ (If your
CD-ROM/DVD is E:\) and click Browse.
8. Points specify a location, example E:\SATA Raid_4Port\Sil3114\Win98_me
_2000_xp_nt4.0, click OK and then Next.
9.Click Next and then Finish.
10. Remove the Driver CD and click Yes to restart Windows to complete driver
installation.
For Existing Windows 98/98 SE Systems
1. After the SATA RAID PCI Host Adapter and attached drives are configured,
boot up Windows.
2. At the Add New Hardware Wizard, click Next.
3. Select Search for the best driver for your device option and then click
Next.
4. Insert the Driver CD, check Specify a location, uncheck the other boxes,
and click Browse.
5.Points specify a location, example E:\SATA Raid_4Port\Sil3114\Win98_me
_2000_xp_nt4.0, click OK and then Next.(If your CD-ROM/DVD is E:\)
6. Click Next and then Finish respectively.