Filter
Top Products
The Linear 2x4 Switcher/Splitter for HDMI is equipped with two HDMI inputs and four
HDMI outputs. Two inputs accommodate the simultaneous connection of up to two
high denition video sources, such as satellite systems and HD DVD players. Four
outputs send the high denition audio/video signals to up to four high denition displays.
Switching is done via the IR remote that is provided with the unit.
How It Works
You simply connect all your sources to the switcher’s HDMI inputs. Then connect up
to four displays to the switcher’s HDMI outputs. Once the sources, the Switcher and
the display(s) are powered and connected, you simply select which source you want
to view using the IR remote.
INTRODUCTION
1
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X4 SWITCHER/SPLITTER FOR HDMI
Display information (EDID) is sent from the display connected to HDMI •
output port 1 to both of the sources connected to the 2X4 Switcher/
Splitter for HDMI. If there is no display connected to HDMI output port 1,
the remaining HDMI output ports will be scanned in succession for an
EDID to use. (See note on page 4 for additional information)
The 2X4 Switcher/Splitter for HDMI can only mirror one input video signal at a •
time to the four display outputs. The user can choose which of the two HDMI
inputs will be displayed on the four HDMI outputs
HDMI/HDCP compliant•
Compatible with all HDMI and DVI* displays•
NOTE: When used with a HDMI to DVI adapter.
OPERATION NOTES