Filter
Top Products
2
Chapter 1
Product Overview
2
Cable Modem with USB and Ethernet Connections
2
NOTE: If the DS and US LEDs are flashing and the Online LED is
not lit, the modem is still operating, but your Internet service
has been disabled by your ISP. Contact your ISP for more
information.
Back Panel
Power The Power port connects the Cable Modem to the
power adapter.
USB The USB port connects the Cable Modem to your
computer using a USB cable.
Ethernet The Ethernet port connects the Cable Modem to
your wired computer or other Ethernet network device using
a Category 5 (or better) Ethernet network cable.
Reset The Reset button can be used to clear the Cable
Modem’s connections and restore its factory default settings.
Using an object with a small tip, such as a pen, press and hold
the button until you feel it click.
Cable The Cable port connects the Cable Modem to the wall
jack using the cable from your ISP. This is a round coaxial cable,
like the one that connects to the back of your cable box or
television.