Filter
Top Products
9
Chapter 5: Configuring the
Wireless-B Game Adapter with the
Setup Wizard
1. Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup
Utility should run automatically, and the screen in Figure 5-1 should appear.
If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM drive).
• Setup - Click Setup to proceed with the Setup Wizard.
• User Guide - Click User Guide to open the PDF file of this User Guide.
• Exit - Click Exit to exit the Setup Wizard.
Click Setup to
begin the setup
process.
8
2. The Setup Wizard will search for the Game
Adapter.
If it cannot find one, you will be asked to check the
connections, as shown in Figure 5-2. Review your
connections and click Continue. The Setup Wizard
will search again.
3. The next screen,
shown in Figure 5-
3, will show the
Game Adapter’s
current settings.
• New Keyphrase -
The Game Adapter
is designed to work
right out of the box.
If you are concerned
with security, how-
ever, you can set the
same Keyphrase on
two Game Adapters
to utilize WEP. The Keyphrase is case-sensitive and should have nine or
fewer alphanumeric characters. It must match the Keyphrase of your wire-
less network and is compatible with Linksys wireless products only.
Click the Next button to continue with the setup.
4. When the Game Adapter is located, you
will be asked to enter your network pass-
word. Type the password in the field, as
shown in Figure 5-4, and click Enter.
Figure 5-2
Figure 5-1
Note: If your wireless network uses WEP encryption and/or has
SSID disabled, the Game Adapter should be configured with its
Setup Wizard to use one of the three available profiles. Profiles
show up on the LED display as “P1”, “P2”, or “P3”. Once the
Game Adapter is configured with its Setup Wizard, select the
appropriate profile from the LED display.
Setup for Head-to-Head play or with a simple wireless connection
is described in “Chapter 4: Simple Setup”.
Figure 5-4
Figure 5-3