Filter
Top Products
Chapter 1
Product Overview
2
Network Storage Link for USB 2.0 Disk Drives
DISK2 The Disk 2 port supports EXT3 and
FAT32 file systems. Insert your USB flash drive
(USB key) or USB disk here.
DISK1 The Disk 1 port of the Network Storage
Link supports EXT3, FAT32, and NTFS file
systems. Connect your USB hard drive here.
(Flash drives will not be recognized.)
Reset The Reset button has two functions:
If the Network Storage Link’s IP Address •
is lost, press and hold this button for
two seconds. The IP Address will be set
to the default value of 192.168.1.77,
and the Network Storage Link will beep
once to indicate the reset has occurred.
If the Network Storage Link’s password •
is lost, press and hold this button for 10
seconds. The password will then be set
to the default value of admin, and the
Network Storage Link will beep again.
NOTE: Resetting the Network Storage
Link will erase all of your settings and
replace them with the factory defaults.
Do not reset the Network Storage Link
if you want to retain the settings.
Power The Power port is where you will
connect the power adapter.