Filter
Top Products
Step 3 – Set the SPA400 to a Fixed IP address
Asterisk needs to access your SPA400, so it needs to be set to a
fixed ip address. To do this: -
Under Setup -> Basic Setup
• Select Fixed IP address and enter a valid fixed IP address for
your network.
• Be sure to enter a DNS server, if you do not know enter the
Telstra DNS server 139.130.4.5 – You can leave the secondary
blank
• Set your time zone.
• Click Save Settings
• Restart System
Sample Config – Use Address Valid For Your Network
Check with the network administrator if unsure.
Note the IP address in the Notes Section.