Filter
Top Products
ADSL USB Modem
5
Connecting the ADSLUSB
Modem to Your PC
Installing the ADSL USB Modem
1. Plug the rectangular end of the USB cable into your PC’s USB port.
Connect the square end of the USB cable into the Modem’s USB port. A
green Power LED will light up, indicating that the modem has been succes-
fully connected to your PC and that its power is on.
2. Connect a standard phone cable from the DSL outlet to the DSL port on
the ADSL USB Modem.
Installing the Modem Driver for Windows 98
Windows 98 will automatically detect the ADSL USB Modem once it is con-
nected to the PC. Before the hardware can function properly with your PC, a
Windows 98 driver for the ADSL USB modem must be installed.
1. Insert the Setup CD into your CD-ROM drive.
2. When the “Add New Hardware Wizard” window appears, make sure that the
Setup CD is in the CD-ROM drive and click Next.
Your hardware installation is now complete.
Instant Broadband
TM
Series
The ADSL USB Modem’s Rear Panel Ports
USB Port Use this port to connect the USB cable from your PC to your
modem.
ADSL Port This port connects your modem to your ADSL line.
The ADSL USB Modem’s Front Panel LEDs
ADSL This LED will
light up when an
ADSL connection
is made. It will
also flicker when
an ADSL connec-
tion is being
made.
Power The Power LED
will light up green
the modem has
successfully con-
nected to your PC
and the modem’s
power is on.
4