Filter
Top Products
PCI Adapter
3. Installation will begin and you will reach the screen shown below. You will
want to select the box that reads Wired to the network since you are adding
network hardware. Then, click the Next button to continue.
4. The next screen will not show any Network Adapters installed on your sys-
tem, which signifies that no network hardware has been previously installed.
You will want to click the Select from list button to continue.
11
Instant Wireless
TM
Series
Windows NT will setup the Network PC Card differently depending upon
whether you’ve previously installed network hardware or not. Please follow the
instructions appropriate for you.
If You Have Never Installed Network Hardware:
1. Windows NT is not a Plug-and-Play Operating System and will not auto-
matically identify the PCI Adapter. To begin setup, insert Setup Utility CD
(included) into your CD-ROM drive and select Start, then Settings, and
bring up the Control Panel. Then, double-click on the Network icon.
2. Windows will notify you that Networking is not installed. Click the Yes but-
ton to continue.
10
Installing the PCI Drivers for Windows NT