Filter
Top Products
24
Chapter 5: Configuring the Wireless-G Router for Mobile Broadband
The Setup Tab - Mobile Network
Wireless-G Router for Mobile Broadband
DNS Supplied by Network. If the network automatically supplies the DNS address(es), click the checkbox. If
you need to specify the DNS address(es), remove the checkmark, and enter the DNS address(es) in the DNS
1-2 fields.
DNS 1-2. Enter the DNS address(es) you want the Router to use.
PIN Code. If required, enter the PIN code of your SIM card. The code will be stored here for future reference by
the Router, and you will not have to re-enter this unless you change SIM cards.
Mobile Network Status
Network Name. Displayed here is the name of the mobile network the Router is using.
Signal Strength. This indicates the strength of the mobile broadband signal that the Router is receiving.
Connection Time. This is the length of time the Router has been connected to the mobile network since your last
connection.
Current Session Usage. Displayed here is the amount of data that has been sent to and received from the
mobile network since your last connection.
Data Card Status
Card Model. Displayed here is the model number of your mobile broadband data card.
Card Firmware. This is the firmware version of your mobile broadband data card.
Phone Number. This is the phone number of the Data Card.
To update the screen with the latest status information, click the Refresh button.
Change these settings as described here, and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.