Filter
Top Products
Chapter 3
Advanced Configuration
16
Simultaneous Dual-N Band Wireless Router
WEP
WEP is a basic encryption method that is not as secure as
WPA.
WEP
Encryption Select a level of WEP encryption, 64 bits 10
hex digits or 128 bits 26 hex digits. The default is 64 bits
10 hex digits.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
Tx Key Select a key from the drop-down menu.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network’s
radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Access Restriction
Wireless MAC Filter
To filter wireless users by MAC Address,
either permitting or blocking access, click Enabled. If you
do not wish to filter users by MAC Address, keep the default
setting, Disabled
.
Prevent PCs listed below from accessing the wireless
network Select this to block wireless access by MAC
Address. This option is selected by default.
Permit PCs listed below to the wireless network Select
this to allow wireless access by MAC Address. This option
is not selected by default.
MAC Address Filter List
Click the Wireless Client List button to display the
Wireless Client List. It shows computers and other devices
on the wireless network. Click the Save to MAC Address
Filter List checkbox for any device you want to add to
the MAC Address Filter List. Then click the Add button. To
retrieve the most up-to-date information, click the Refresh
button. To exit this screen and return to the Wireless MAC
Filter screen, click the Close button.