Filter
Top Products
3
HARDWARE CONNECTIONS
The LK7000 can be connected to an IBM101 PC, XT, AT or clone
computer, PS/2 computer, or computer terminal. The following diagram
shows how the keyboard connects to the computer and standard
keyboard or other keyboard peripheral (magnetic stripe reader, scanner,
etc.).
NOTE:
Before making any connections it is always advisable to
turn off the computer.
A.Connecting the LK7000 to an IBM101 PC, XT, AT, or clone
computer’s keyboard port:
1. Use the computer interface cable. Plug the AT or PS/2 Male
connector plug into the compter. Connect the RJ11 connector into
the “To Computer” connector on the LK7000.
2. Connect the keyboard interface cable to the standard keyboard. The
PS/2 Female connector plugs into the PS/2 connector on the rear
panel of the LK7000. The RJ11 connector plugs into the “To
Peripheral” connector on the back of the LK7000.
To
Computer
Reserved
for optional
MSR
To
Peripheral