LOREX Technology ACC-HDB80 Network Card User Manual


  Open as PDF
of 3
 
TROUBLESHOOTING:
If the system does not function properly, please check the following points:
Remove the Key LockKeypad doesn’t work
Re-insert HDD as per instructions on “Installing the HDD”.
Make sure that the HDD cartridge is locked.
Check the jumper setting, it must be set to SLAVE.
HDD not found
The HDD is Full, and Overwrite is not
enabled
Recording stopped
Check the jumper PIN connection.
Activate the Slave HDD in the DVR or DVR Combo’s Menu
options.
(See the Owner’s Manual for the DVR or DVR Combo).
Slave HDD not readable
SOLUTIONPROBLEM
SPECIFICATIONS
HDD capacity: 250GB (Max.)
Interface Cable: 40 pin IDE (30 cm, 11.8 inches)
Outer Case: Steel Construction
Power Supply: 12V DC, 1.0A
Dimensions: 5.9”(W) x 3.8”(H) x 8.9”(D)
As our products are subject to continuous improvement, SVII and its subsidiaries reserve the right to modify product
design,specifications and prices, without notice and without incurring any obligation. E&OE
Distributed By:
STRATEGIC VISTA CORP.
300 Alden Road, Markham, Ontario, Canada L3R 4C1
For more information: www.strategicvista.com
 previous