Filter
Top Products
MegaRAID SATA 150 Storage Adapters User’s Guide 3-1
Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Chapter 3
SATA 150 Storage Adapter
Characteristics
This chapter describes the characteristics of the MegaRAID SATA 150
PCI to Serial ATA storage adapters. The chapter includes these topics:
• Section 3.1, “MegaRAID PCI to Serial ATA Storage Adapters”
• Section 3.2, “Physical and Environmental Specifications”
3.1 MegaRAID PCI to Serial ATA Storage Adapters
The MegaRAID SATA 150 storage adapters conform to the PCI Local
Bus Specification, Revision 2.2, and are backward compatible with
previous revisions of the PCI specification. The adapters also support the
Serial ATA Specification, Version 1.0. The SATA 150-4 and SATA 150-6
storage adapters have an Intel 80302 processor that provides intelligent
RAID management capability.
Tabl e 3.1 lists the MegaRAID SATA 150 storage adapters and
summarizes the characteristics of each board.
The following sections have detailed descriptions of each SATA 150
storage adapter.
Table 3.1 MegaRAID SATA 150 Characteristics
Adapter Ports RAID Modes PCI Bus Mode Board Dimensions
SATA 150-6 6 0, 1, 5, 10, and 50 64 bits, 66 MHz 6.875 x 4.2 inches
(174.63 × 106.68 mm)
SATA 150-4 4 0, 1, 5, and 10 64 bits, 66 MHz 6.875 x 4.2 inches
(174.63 × 106.68 mm)
SATA 150-2 2 0 and 1 32 bits, 66 MHz 6.6 × 2.53 inches
(167.6 × 64.3 mm)