Filter
Top Products
3-2 Firmware Installation Procedure
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
3.2.1 Features
The Fibre Channel firmware for the LSI Logic Fibre Channel chips
supports these features:
• 1 Gbit/s and 2 Gbit/s Fibre Channel transfers, with Auto Negotiation
(user selects 1 Gbit/s, 2 Gbit/s, or Auto)
• 32-bit and 64-bit PCI support
• 33 MHz and 66 MHz PCI support
• Transaction performance capability of >70,000 I/Os per second (both
channels)
• Throughput capability of ~400 Mbytes/s, across 64-bit/66 MHz PCI
(both channels)
• Low host CPU utilization
• Interrupt coalescing, tunable to system requirements
• Auto Topology Detection for Arbitrated Loop, Fabric Loop, or Direct
Fabric attachment (user selects N_Port, NL_Port, or Auto)
• FC Class 3 support
• FC-Tape/FC-AL2 Class 3 confirmed delivery support
• LSI Logic Fusion-MPT common software interface
• Initiator, Target, and FC LAN capability
3.2.2 Description
The LSIFC929 controller operates in an environment where one or more
host drivers serve as the interface layer between the operating system
and the Fusion-MPT services provided by the LSI Logic Fibre Channel
firmware. The host driver is responsible for initializing the controller,
building request message frames, issuing request message frames to the
controller, and processing reply message frames received from the
controller.
The LSI Logic firmware translates Fusion-MPT message frames into
Fibre Channel specific sequences, frames, and primitives that are
delivered to the Fibre Channel transmit and receive physical interfaces.
The firmware-based Link Services library provides all link service support
used by the host for all FC topologies, transparently. The firmware also