Filter
Top Products
Page 10 - Setting Up the 20DS
INDeX 20DS User's Guide 38DHB0002UKCN – Issue 3 March 2000
DSS Key Label
Next to each column of DSS keys is an area in which you can label
each key. You can remove the label cover to write on the card below.
To remove the label cover:
1. Insert a fine but not sharp point (e.g. end of a paper-clip) into the pin
hole at the top of the label cover. Use this to squeeze the label
downwards, the label should bow.
2. Lift the label cover clear and remove the card insert.
To replace the label cover:
1. Replace the card insert.
2. Slide the tabs on the bottom edge of the label cover into their slots.
3. Bow the label cover to slip the tabs on the top edge into their slots.
Label Template
A template exists for creating labels for the DSS keys on terminals,
20CC turrets and 2030/50/60 telephones. The template file
(
SDXLABEL.DOT
) works with Microsoft Word for Windows 2, 6 and 7.
You can download a copy of the DSS Label Template from the web site
http://www.sdxplc.com and/or from the CD supplied with the terminal.
To use the template:
1. Copy the file
SDXLABEL.DOT
into the Word template directory, i.e.
the directory containing other
.DOT
files (this varies according to the
version of Word and other Microsoft programs that you use, typically
it is the WINWORD or TEMPLATE directory).
2. Start Word. Select
File
and then
N
ew...
.
3. From the list of templates select
SDXLABEL
.
4. Follow the instructions included within the template.