Lucent Technologies GW-DS300N Network Card User Manual


 
2
20
GW-DS300N
Channel Here it shows the number of the radio channel used
for the wireless connection. The channel setting of
the wireless stations within a network should be the
same.
Encryption This section shows whether the APs are using
encryption or not. There are four kinds of encryption:
WEP”, “AES”, “TKIP”, “TKIP; AES (BOTH)
”and“None”. If the AP which you want to connect
needs the encryption (the encryption section shows
WEP, TKIP or AES, etc), double click on the name
of the AP or click“Connect”button and then the
configuration page of encryption will show.
Authentication This section shows the authentication using by the
AP. There are five kinds of authentication:
Unknown”,“WPA-PSK”, “WPA2-PSK”,“WPA
and“WPA2”.
Network Type There are two types of network type, including
Ad-hoc”and“Infrastructure”.
Rescan Rescan and update all the details of every detected
AP.
Connect Click this button to connect with the selected AP.
Add to Profile Click this button to add the selected AP to the profile.
OK Click this button and the utility will save the settings
and close the page.