Filter
Top Products
PARTNER Voice Messaging
Initial Settings
The following are the initial settings for PARTNER Voice Messaging:
■
Mailbox 1—the general mailbox—is assigned to extension 10.
■
Mailbox 2 is assigned to extension 11.
■
Mailbox 3 is assigned to extension 12.
■
Mailbox 4 is assigned to extension 13.
■
The following factory-set general mailbox greeting plays if a call is
transferred to PARTNER Voice Messaging:
Welcome to the PARTNER Voice Messaging.
Please press [
1
] to leave a message.
■
The following factory-set Personal Mailbox greeting plays for individual
subscriber mailboxes (1–4):
Your party is not available. Please leave a message after the tone.
PARTNER ACS Initial Settings
Following are the initial settings for the PARTNER ACS system Release 1.1 or
later when a PARTNER Voice Messaging PC Card is present:
■
Virtual extensions 78 and 79 are assigned to the two voice ports on
PARTNER Voice Messaging.
NOTE:
✏
A virtual extension is an extension number that exists in system software
only, and is not associated with a physical extension jack on a module.
The Idle-Line Preference for extensions 78 and 79 is automatically set to
■
■
Intercom First.
The Intercom dial tone for extensions 78 and 79 is automatically set to
Machine.