Filter
Top Products
17
6. Click the OK button in the Internet Protocol (TCP/IP) Properties window.
7. Click the OK button in the Local Area Connection Properties window.
4.1.4 Windows 95/98/ME
1. Double-click the Control Panel icon in My Computer folder or locate it in the
Start Menu. The sub-folder Control Panel is located under Settings.
2. In the Control Panel, double-click the Network icon. The network interface
card (installed on your computer) appears along with the network protocol on
the Configuration list.
3. Double-click TCP/IP protocol on the list. If TCP/IP does not appear on the
list, install the TCP/IP protocol first as illustrated in step 4. Clients with
TCP/IP already installed may skip to step 5.
4. To install the TCP/IP protocol:
a. Keep your copy of Windows 95/98/Me CD-ROM on hand. (You will need
it for this installation.)
b. Click the Add button from the Configuration list of the Network window.
A new window will appear.
c. Double-click Protocol. Then, in the Select Network Protocol window,
choose Microsoft on the Manufacturers list, and select TCP/IP on the
right side of the list.
5. Follow the instructions on the screen to complete the installation process. It
should prompt for a restart and then follow on with step 6, as you will now
find a TCP/IP Protocol in your Network control panel.
6. After double-clicking the installed TCP/IP protocol, the TCP/IP Properties
window appears. To have the XRouter Aero Plus automatically assign
computers a correct TCP/IP configuration please follow the steps: