Filter
Top Products
3
WIZZ.IT 3 OPERATION
After Wizz.it 3 is installed, the Wizz.it 3 icon is displayed on the PC desktop.
Double-clicking the icon starts Wizz.it 3.
To make settings for the remote controller after startup, either edit the default confi guration fi le or use a
new confi guration fi le.
ICON DESCRIPTIONS
qwe rt yuio!0 !1 !2 !3 !4 !5 !6 !7 !8
q New Confi guration
This creates a new setting confi guration.
w Open Confi guration
This opens a setting fi le saved in the PC.
e Save Confi guration
This saves the configuration that is being
edited as a user fi le to the PC.
r Download to remote control
This writes the edited configuration to the
remote controller.
t Upload from remote control
This loads remote controller settings to the
PC.
y Undo
This is used to undo an edit operation in the
settings.
u Redo
This is used to redo an edit operation in the
settings that were undone.
i Cut
This cuts a selected setting.
o Copy
This copies a selected setting.
!0 Paste
This pastes a selected setting.
!1 Delete
This deletes a selected setting.
!2 Label
This is used to set the label of a selected
device or button.
!3 Properties
This is used to set the properties of a selected
device or button.
!4 Add new device
This adds a new device.
!5 Add new page
This adds a new page.
!6 Wizz. it Simulator
This simulates on the PC the remote controller
that was set.
!7 Clock Sync
This synchronizes the internal clock of the
remote controller with the internal clock of the
PC.
!8 Help
The User Manual is displayed as a PDF fi le.