![](http://pdfasset.owneriq.net/8/3c/83cbf1ae-8617-49ff-a7ee-aeddd3e12a35/83cbf1ae-8617-49ff-a7ee-aeddd3e12a35-bg9.png)
7
LEARN IR
1.
Use a USB cable to connect the PC making the settings to the remote controller (RC3001/
RC2001).
2.
Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver
on the remote controller at a distance of about 2 inches (0.05 m).
3.
Click the Learn IR icon in Add IR Code Window .
4.
This enters the learning standby mode. Send the remote controller code that you want to learn.
5.
Learning is complete when LEARN OK is displayed in Results.