Marantz VP-11S2 Projector User Manual


 
23
ENGLISH
NO SIGNAL VALID SIGNAL
ANY INPUT
VIDEO or S-VIDEO COMPONENT
NTSC PAL/SECAM 480i/576i 480p/576p 480i/576i 480p/576p Other
1080i/720p/
1080p/540p
HDMI CSC HDMI 1
–––– ––––
CSC HDMI 2 –––– ––––
Deep Color HDMI 1 –––– ––––
Deep Color HDMI 2 –––– ––––
Display Keystone ●●●● ●●●●
Scale ●●●● ●● ●●●
Width ●●●●●● ●●
Position H ●●●● ●● ●●●
Position V ●●●● ●● ●●●
Color Wheel ●●●● ●●●●
Installation ●●●● ●●●●
OSD/Blanking Menu Position ●●●● ●●●●
Language ●●●●●● ●●
Status Info. ●●●● ●●●●
Power-OFF Confirm. ●●●● ●● ●●●
Blanking Memory ●●●● ●● ●●
Blanking Top *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Bottom *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Left *8 *8 *8 *8 *8 *8 *8 *8 *8
Blanking Right *8 *8 *8 *8 *8 *8 *8 *8 *8
Configuration Auto Power Off
●●●● ●●●●
Trigger 2 Full ●●●●●● ●●
Trigger 2 Normal ●●●● ●●●●
Trigger 2 Zoom ●●●● ●●●●
Trigger 2 V-Strech ●●●●●● ●●
Trigger 2 Through ●●●● ●●●●
Remote Control ●●●● ●●●●
Reset Lamp Life ●●●● ●●●●
Reset All ●●●●●● ●●
*1 Can be selected only when User is selected for the Picture Mode.
*2 On only when interlaced signals are input. (Off for progressive signals.)
*3 On only when 1035i / 1080i signals are input.
*4 On when Aspect is set to V-Stretch for HD signals. For other signals, On when Aspect is set to Zoom or V-Stretch.
*5 On when the RGB/HD Adjust mode is set to Memory.
*6 On when the RGB/HD Adjust mode is set to Memory. However, as an exception, it is Off when Aspect is set to Through or V-Stretch.
*7 On when 480i/p or 576i/p signals are input.
*8 On when Blanking Memory is selected for OSD/Blanking.
*9 Cannot be selected when the default is selected for Picture Mode.
*10 Can be selected when the input signal is 540p, 720p, 1035i, 1080i, or 1080p.
*11 Off when the input signal is 480i/p or 576i/p.