Marantz PD4240D Computer Monitor User Manual


 
27
Power
management
mode
On
Off
Turning the picture
back on
Picture already on.
Operate the keyboard or
mouse. The picture
reappears.
POWER/
STANDBY
indicator
Green
Red
Power
management
operating status
Not activated.
Activated.
Description
Horizontal and vertical
synchronizing signals
are present from the
computer.
Horizontal and/or
vertical synchronizing
signals are not sent
from the computer.
Setting the picture to suit the movie
The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I
(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION2, then press
the MENU/ENTER button.
The OPTION2 screen appears.
2. Use the and buttons to select CINEMA MODE.
3. To set the CINEMA MODE to OFF ...
Use the
and
buttons to select OFF.
The mode switches as follows each time the
or
button is pressed:
ON OFF
OPTION2
2 / 3
EXIT
PREVIOUS PAGE
POWER MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
NEXT PAGE
: OFF
: OFF
: 3
: OFF
SEL.
RETURN
ADJ.
Information
CINEMA MODE
ON ...................Automatic discrimination of the
image and projection in cinema mode.
OFF ...................Cinema mode does not function.
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture,
positive/negative mode and screen wiper are adjusted to
reduce burn-in of the screen.
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION2, then press
the MENU/ENTER button.
The OPTION2 screen appears.
2. Use the and buttons to select LONG LIFE, then
press the MENU/ENTER button.
The LONG LIFE screen appears.
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
: AUTO
: OFF
: OFF
: OFF
: OFF
SEL.
RETURN
ADJ.
3. Set the LONG LIFE mode using ▲▼
and
buttons.
See page 27 to set PLE.
See page 28 to set ORBITER.
See page 28 to set INVERSE.
See page 29 to set SCREEN WIPER.
See page 30 to set SOFT FOCUS.
Information
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting “PLE” to “LOCK1”
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select PLE.
4. Use the
and
buttons to select LOCK1.
The mode switches as follows each time the
or
button is pressed:
AUTO LOCK1 LOCK2 LOCK3
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
: LOCK1
: OFF
: OFF
: OFF
: OFF
SEL.
RETURN
ADJ.
Information
PLE settings
AUTO .............. The brightness of the screen is
adjusted automatically to suit the
picture quality.
POWER/STANDBY indicator