Marantz VP12S1 Projector User Manual


 
6
ENGLISH
a POWER ON key
Turn the projector on.
s STANDBY key
Turn the projector off.
d 3 / 4 / 1 / 2 keys
Control the MENU cursor.
f ENTER key
Confirm "Reset All", "Reset Lamp Life", "New Lamp?".
g MENU key
Display the on-screen menu.
h COMPONENT key
Select the COMPONENT VIDEO IN signal.
j S-VIDEO key
Select the S-VIDEO IN signal.
k VIDEO key
Select the VIDEO IN signal.
Remote Controller
l RGB key
Select the RGB IN signal.
¡0 THEATER key
Select the Theater picture mode.
When the key is pressed, the mode toggles Theater1,
Theater2, Theater3 and Theater Default.
¡1 STANDARD key
Select the STANDARD picture mode.
When the key is pressed, the mode toggles Standard1,
Standard 2, Standard 3, and Standard Default.
¡2 DYNAMIC key
Select the Dynamic picture mode.
When the key is pressed, the mode toggles Dynamic1,
Dynamic2, Dynamic3 and Dynamic Default.
Note :
If you need discrete command for above picture modes, you
can down load from "www.marantz.com".
¡3 INFO key
Turn the information menu on or off.
¡4 CINEMA key
Press to turn the CINEMA mode – auto 3-2 pull down mode
– on or off.
¡5 NORMAL key
Select NORMAL mode from four aspect ratio modes.
¡6 FULL key
Select FULL mode from four aspect ratio modes.
¡7 ZOOM key
Select ZOOM mode from four aspect ratio modes.
¡8 THROUGH key
Select THROUGH mode from four aspect ratio modes.
¡9 AUX key
Select the AUX IN (DV IN) signal.
™0 FOCUS key
Display a focus pattern.
™1 V-MUTE key
Cuts off the picture.
a
d
g
l
¡2
¡5
¡7
™1
¡1
¡4
s
h
k
¡0
¡3
¡4
¡9
¡8
™0
j
f
PROJECTOR