Filter
Top Products
Operation
UNIPRO 3.5
Rev. 11.00
December 30,1995
Press the [PROG/AUTO/ MAN] key until the
Auto or Man LED is flashing, indicating a
program is in HOLD. Return to the program
mode by pressing [PROG/AUTO/MAN] and the
PROCESS window will display the word HOLd.
The SET window indicates the program number
that is in hold. Press any of the arrow keys to
cancel the program. The hold symbol will be
replaced by the run symbol.
Placing a Program in HOLD
1. Press [PROG/AUTO/MAN] UNTIL the
instrument is in either Auto or Man mode as
indicated by the LEDs. The flashing LED
signifies the program is in HOLD.
OR
Press [SHIFT]+[LEFT ARROW].
Note
If the instrument is in Manual mode and a program is in
HOLD, no automatic control is taking place.
If the instrument is in Automatic mode and a program is in
HOLD, automatic control is continuing.