Filter
Top Products
Lynx LCD Monitor User Manual
Lynx LCD Monitor User Manual
2
Caution:To reduce the risk of electric
shock, do not remove the back.
There are no user-serviceable
parts inside. Always refer
servicing to qualified personnel.
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
The lightening flash symbol inside the triangle is intended to
alert the user to the presence of un-insulated and dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within the triangle is intended to alert the
user to the presence of important operating and maintenance
(servicing) instructions.
Graphic Symbol Explanation
Warning– To Prevent Fire or Shock Hazard, DO NOT
Expose this Monitor to Rain or Moisture
This product must be grounded.
Product specifications are subject to change without notice.
IMPORTANT SAFEGUARDS
Please comply with warning regarding power requirements. The power source contains high
voltage parts. If the cover is removed, it may cause fire or electric shock. Do NOT remove the cover.
Caution
1. Read the Instructions: All safety and operating instructions should be read before the
monitor is operated.
2. Follow the Instructions: All operating and user instructions should be followed.
3. Cleaning: Unplug the monitor from the wall outlet before cleaning. Do not use liquid
aerosol cleaners. Use only a damp, soft cloth.
4. Water and Moisture: Do not use the monitor in damp environments. For example, do not
operate the monitor in bathrooms, sinks, laundry rooms, wet basements
or near a swimming pool. Lynx monitors are not recommended for
outdoor use.
5. Accessories: Always ensure that the monitor is placed on a solid, steady surface/stand.
To avoid any possible danger and/or damage, do not place the monitor on
an unsteady stand, stool, or other surface that could result in the
monitor falling.
6. Ventilation: Slots and openings in the monitor’s cabinet are provided for ventilation and
ensure reliable operation of the monitor and to protect it from over-heating.
These openings must never be blocked. The monitor should never be
placed near or over a radiator or head register. This monitor should not be
placed or built in to a rack or bookshelf unless proper ventilation is
provided and supplier instructions have been adhered to.
7. Object and Liquid Entry: Never push any kind of object into this monitor through an opening as it
may touch dangerous voltage points or short out parts that would result in
fire or electric shock. Never spill liquid of any kind into the monitor.
8. Repair (Servicing): Do not attempt to repair this monitor yourself by opening or removing
covers. This may expose you to dangerous voltage or other hazards.
Refer to a qualified service technician if servicing is necessary. If monitor is
opened by anyone other than a factory authorized service center, the
warranty is voided. If serial number is removed or tampered with, the
warranty is voided.
9. Parts Replacement: When part replacement is required, make sure it is performed by a qualified
technician and that the parts are supported by the manufacturer.
10. Storage Temperature: The storage
temperature of this device is -20º - +70ºC.
11. Safety Check: Upon completion of any service or repair to the monitor, ask the service
technician to perform a safety check to ensure that the monitor is in proper
operating condition.
12. Keep the Instructions: The safety and operating instructions should be kept for future reference.
3