Filter
Top Products
22
On-Screen Menu (continued)
IMD CONFIGURATION SUBMENU
■
Overview
The V-R653-IMD-TE features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three
colors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below).
Alternately, IMD text and tally can be remotely controlled via the RS-422/485 serial interface using several industry-
standard protocols, including TSL and Image Video. Multiple V-R653-IMD-TE monitors can be looped together and
each addressed individually via the protocol. All menu features of the V-R653-IMD-TE can also be controlled via the
Marshall Network Controller box and Marshall protocol. (Contact Marshall Electronics for additional information).
Use the IMD Configuration submenu to configure various IMD parameters as described below.
■
IMD Protocol
Use the IMD Protocol menu option to choose the protocol with which the V-R653-IMD-TE receives remote commands.
Currently, four protocols are available. Contact Marshall Electronics for the latest protocol compatibility.
Image Video
Use the Image Video protocol setting when controlling the IMD from an Image Video tally controller or other
controlling device which utilizes the Image Video protocol. The IMD #, IMD Name, and Baud Rate parameters
must be set for each screen in conjunction with the controlling device.
TSL v4.0
Use the TSL v4.0 protocol setting when controlling the IMD from a TSL tally controller, or other controlling device
which utilizes the TSL v4.0 protocol. The IMD # must be set for each screen in conjunction with the controlling
device.
MEI
Use the Marshall protocol setting when controlling the V-R653-IMD-TE using the Marshall Network Controller box.
This protocol allows remote control of all features on the V-R653-IMD-TE, including marker setup, video
configuration, system configuration, and image adjustments (brightness, contrast, etc.). The IMD #, IMD Group #,
and Baud Rate parameters must be set in conjunction with the Network Controller Box.
MEI-Image Video
This protocol setting accepts Image Video commands via the Marshall protocol, for use when an Image Video
controller is connected to the Marshall Network Controller box.
IMD Configuration Submenu