Filter
Top Products
21
On-Screen Menu (continued)
OSD CONFIGURATION SUBMENU (continued)
■
LED Tally
Use this setting to enable or disable the LED Tally. When enabled, the red and green LEDs beside each display will
respond to tally commands, according to the Tally Source setting (see page 24).
NOTE: Only red and green tally LEDs are available. Commands via contact closure or serial protocol to activate yellow
tally will have no effect on the LED tally. Yellow is only reflected in OSD tally.
■
Time Code
Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data
(VANC) within the SDI signal. Two types of time code can be selected to display on the screen: LTC (linear time
code) or VITC (vertical interval time code).
The position of the time code display varies based on the aspect ratio setting and presence of IMD text (see Aspect
Ratio diagrams on page 13).
■
Audio Monitor
Use the Audio Monitor menu option to enable or disable the audio presence indicator icon. When enabled, this icon
indicates whether embedded audio is present in the SDI video input. A red circle and cross will flash on the icon if no
embedded audio is present.
Embedded Audio Present
No Embedded Audio
00:00:00:00
Time Code display
Hours Minutes Seconds Frames