Filter
Top Products
6
For more information on running SETUP, refer to
the file README.TXT in the root directory of the
driver diskette.
The following configuration options are available in
the SETUP Main Menu:
• View Current Configuration
• Setup
• Run Diagnostics
View Current Configuration displays the current
settings of the card.
The Setup option allows user selection of param-
eters such as Operating Mode, Medium type, Full-
Duplex Enable/Disable, I/O Base Address, Inter-
rupt, and Boot ROM Address. Setup is used to
configure the card in systems without Plug and
Play capabilities.
2.4 Testing The Adapter
Adapter diagnostics are included in the SETUP.EXE
program found in the root directory of the driver
diskette. Refer to the file README.TXT in the
same directory for detailed information.
Note: To run the diagnostics under Windows 95,
click on Start/Shut down and select “Restart the
computer in MS-DOS mode.” Run SETUP.EXE
from the DOS prompt.
Setup provides the following testing options when
you select Run Diagnostics from its Main Menu.
• Run EEPROM Test
• Run Diagnostics on Board
• Run Diagnostics on Network
The EEPROM Test option performs read/write
tests on the adapter's on-board EEPROM registers
and reports the results.
The Run Diagnostics on Board option runs sev-
eral tests and the results are indicated by either
PASS or FAIL counts. Make sure that the network